Like all major subjects about the marine aquarium hobby, setting up a system
is full of new terminology, concepts, and controversy… But don’t become
overwhelmed. Once you’ve gone through the learning of your options, and
gathering of the necessary gear and materials, the actual set-up is simple, even
fun!
What are needed in these steps are patience, a plan, intelligent observation
and actions, and more patience. Setting up a marine aquarium properly takes
time, and your success with your set-up will closely parallel the care and time
you have put into it’s arrangement.
A Plan: The What, How and When of Your System:
What sort of marine aquarium do you want? There are many types… Fish Only
(FO), Fish Only With Live Rock (FOWLR), Fish and Invertebrates, and different
types of Reefs. This progression of types involves more and different components
and approaches to setting-up and a greater degree of sophistication, cost, and
dedication on your part.
Where will you place the system? It will be HEAVY (About ten pounds per
gallon), and needs to be placed on a solid, planar, level base… on strong
flooring. The tank should be out of direct sunlight (to help control algae and
reduce temperature fluctuation), slightly away from the wall (for access, gear),
in an area where it can be best appreciated.
When do you get to do what? Not only are the order of what parts you install
important, there are standard events that you can/should anticipate happening in
your system that tell you that "things" are progressing, and signal it’s time to
move ahead to your next step. After gathering your system’s components together,
testing them, assembling the tank, comes a "break in" period of a few days to
weeks (depending on type of system, whether live rock is used…).
Think about your plan, what you want, expect your system to do, where you’re
going to put it…deeply. It is obvious that the enjoyment, function and beauty of
your system are determined by your plan and how well you execute it.
Parts & Tools:
In the brief space/time we have here, there’s no way we can adequately
cover all the particulars of what is involved specifically in putting different
types of marine set-ups together, but let’s cover the basics to give you an idea
of what’s involved.
Think you’ve got everything you need? The basic tank, filters, plumbing,
lights and hood… salt mix, test kits for your set-up? How about a hydrometer to
measure specific gravity? A thermometer to go along with your heater? There are
many variations on what goes into a marine set-up, and many possible "extras" to
make the initial set-up go easier… not to mention ongoing maintenance.
The tank itself should be large (a forty gallon is a good starter for
marines, to give you flexibility, stability), flatter rather than a "show" (i.e.
tall and narrow) model, and made of chemically inert materials… typically glass
and silicone, or acrylic.
Should you have a top? Yes. To house your lighting and possibly more… cut
down on evaporation, and keep your livestock from launching themselves out of
the system. Along with the top come considerations of lights, lighting… Many FO
systems get by on just enough types and amount of light for human appreciation…
more involved invertebrate to full-blown reef systems require intense,
full-spectrum lighting.
Filtration is a huge topic and a controversial one for marine set-ups… You’ll
want to become knowledgeable about what’s involved here to make your own mind up
about options… "Many roads lead to Rome" as you’ll find out, with many detours
and stop signs along the way.
Tied in with filtration are the aspects of circulation and aeration.
Practically speaking, saltwater aquariums can’t have their water moved around
too much. When in doubt, move your water!
Substrates? Like gravel and sand? Some folks eschew their use in their marine
systems, but a hard substrate bottom material can/will gain you many benefits,
adjusting water quality, giving your livestock a place to be… and they look
nice. Here again, there are many options as to amount, types, size, and shapes
available.
Salt mix, a hydrometer to measure your water’s specific gravity, test kits, a
heater and thermometer, cleaning equipment (designated bucket,
siphon/gravel-vacuum, sponges, scraper), a net, reference book(s)… and more are
all part of the marine aquarium set-up experience and beyond. Make your own
checklists of "must have" gear and "options".
The Importance of a Test Run:
You now know what to do, and have all the parts and tools to do it? Not
so fast. Take my best advice here and do a "dry" and "wet" run with assembling
all the parts of your set-up, and running it with just freshwater in it for a
day or two… Much to discover here… Missing parts, components, how all this stuff
works together… whether you really wanted to move the aquarium a little over or
out… before putting in your synthetic salt mix, gravel, and any living
component.
Trust me here… and do take your time once the system is "finally" together
with your first seawater, and run it for a good week before placing live rock
(if you’re using same), any starter livestock. You and your new saltwater
wet-pets will appreciate it.
Looking for More Help? We’ve Got it!
Petstore.com has much more information on the topics of what goes into a
marine system, and how to put it together. Take a look at their archives,
ffexpress.com extensive collection of FAQs, and the Pet Care Guide on Marines
at:
http://petstore.com/care_center/fish/saltwater_main.jhtml
<Note to Patricia, editors… you’re welcome to refer folks to the pertinent
sections on Marine Set-Up on my site, www.wetwebmedia.com for input as well>